Repairs
Repair paths that address the source, affected layers and final verification.
Balance the ventilation system
Measure and adjust supply, extract and transfer pathways as a system.
Clean and recommission roof drainage
Remove blockage, verify slope, outlets, joints and discharge during rain.
Clear and verify a condensate drain
Restore flow, clean accessible pan surfaces and test under operating conditions.
Correct a restricted dryer exhaust
Use a suitable short, smooth and serviceable path to outdoors.
Correct surface grading
Create a durable slope and drainage route away from the foundation.
Correct water hammer
Address valve closure, pipe support, pressure and suitable arresting measures.
Dry and verify before closing an assembly
Confirm that affected layers have stabilized before concealment or restoration.
Extend downspout discharge away from the foundation
Move roof runoff to a stable discharge point that does not return toward the building.
Improve bedroom air transfer
Provide an intentional return or transfer route while maintaining privacy and acoustic needs.
Reconnect bathroom exhaust to outdoors
Provide a continuous, supported and insulated route where required.
Remove irreversibly damaged porous material
Replace material that has lost integrity or cannot be cleaned and dried reliably.
Repair a crack after movement assessment
Determine whether movement is active before cosmetic filling.
Repair a drain or fixture seal
Correct the wastewater pathway and clean affected materials appropriately.
Repair an active supply leak
Isolate water safely, replace the failed pipe or fitting and verify under pressure.
Repair the source before the finish
Do not repaint, reseal or replace the visible surface before the controlling source is corrected.
Replace a failed insulated-glass unit
Replace the sealed glazing unit while checking frame drainage and surrounding seals.
Restore a drain-trap water seal
Refill or correct the trap and investigate repeated loss of water.
Restore the window flashing path
Reconnect sill, jamb and head details to the wall drainage plane.
Seal attic air-leakage pathways
Address ceiling penetrations and bypasses before adding insulation.
Stabilize a loose subfloor connection
Identify movement between layers and fasten without damaging concealed services.
