What a complete scope must answer
Before work on Corners and thermal bridges, the scope should state the suspected source, affected route, accessible evidence, unresolved alternatives and the condition that will be checked after work.
Source control comes before appearance
A scope that only cleans, paints, seals, tightens or replaces the visible finish does not explain how moist indoor air reaches a surface below its dew-point temperature and releases water will be controlled. The source-control action and its limit should be written separately.
Affected layers and adjacent systems
List the layers around windows, wall corners, exterior closets, roof slopes or thermal bridges that may need inspection, drying, isolation or protection. Include electrical, plumbing, ventilation, structural and hazardous-material boundaries where relevant.
Exclusions and uncertainty
State what has not been inspected and which alternatives remain possible: high indoor moisture load, weak ventilation, local thermal bridging, air leakage and exterior water entry. This protects the investigation from becoming more certain than the evidence.
Verification clause
Define the comparable trigger, waiting period, locations and method that will be used to judge the result. Immediate cosmetic improvement is not a verification plan.
When the house is not ready for a repair scope
Pause when the source is unbounded, the original evidence has not been recorded, safety limits are crossed or different causes require incompatible work. The source set for this guide includes 4 official records selected for this path. They provide general technical and safety context; they do not determine the condition of a particular house.
Primary references for this topic family
These references ground the general building-science or safety context. They do not diagnose a specific house, replace local requirements or certify a repair.
