Mechanism in plain language
How inlet/outlet continuity, wind and insulation placement affect attic airflow without replacing source control. In this path, the relevant mechanism is indoor moisture, outdoor water and heat flow can converge at the roof assembly with different seasonal patterns A mechanism is only useful when it connects a trigger, a route and an observable result.
What must be true for the mechanism to fit
The event timing must agree with the transport or movement time, the geometry must offer a plausible route and the strongest changes should occur where the mechanism predicts—not merely where the finish is easiest to see.
Follow energy, water, air, load or material movement
Trace the pathway through attic floor, roof deck, eaves, penetrations, valleys or insulation boundary. Mark where the driving force begins, which layer or connection carries it and where the visible symptom finally appears. A source and an exit point are often different places.
Lookalikes that use a different pathway
Compare air leakage condensation, exterior roof entry, blocked drainage, ventilation imbalance and localized duct leakage. For each alternative, write one observation that would strengthen it and one that would make it less likely. Avoid treating a familiar mechanism as the default answer.
Safe evidence that improves the model
- Compare cold-weather and rain-event timing
- Map symptoms around penetrations and roof geometry
- Look for indoor air paths before assuming more ventilation is the answer
- Repeat one controllable trigger at a time where safe and preserve an unaffected reference.
- Record instrument placement and operating state; an indicative reading is not a hidden-condition diagnosis.
Limits and professional boundary
Do not walk unsafe framing, disturb suspect insulation or work near electrical hazards. Active roof leakage, widespread decay or unstable materials needs qualified inspection. The source set for this guide includes 4 official records selected for this path. They provide general technical and safety context; they do not determine the condition of a particular house.
Primary references for this topic family
These references ground the general building-science or safety context. They do not diagnose a specific house, replace local requirements or certify a repair.
